pscan

 

Wiki

The master copies of EMBOSS documentation are available at http://emboss.open-bio.org/wiki/Appdocs on the EMBOSS Wiki.

Please help by correcting and extending the Wiki pages.

Function

Scan protein sequence(s) with fingerprints from the PRINTS database

Description

pscan reads one or more protein sequences and searches them against the PRINTS database of diagnostic protein signatures (fingerprints). A fingerprint is a group of conserved motifs or elements that together form a diagnostic signature for a particular protein family. The minimum and maximum number of elements per fingerprint may be specified. pscan writes an output file with details of any matches between each input sequence and the fingerprints. It reports various classes of matches:

Algorithm

The matrix information used to scan a sequence is derived from the final motif sets in the PRINTS database. The matrices are of the simple frequency type and contain the number of times a residue occurs in each position of a PRINTS alignment. Each matrix therefore has a highest possible score, being the sum of the maximum score of each column. A match to a window over the input sequence is obtained if it has a score equal to or greater than the percentage of the maximum score of the lowest scoring sequence in the final motif set.

Usage

Here is a sample session with pscan


% pscan 
Scan protein sequence(s) with fingerprints from the PRINTS database
Input protein sequence(s): tsw:opsd_human
Minimum number of elements per fingerprint [2]: 
Maximum number of elements per fingerprint [20]: 
Output file [opsd_human.pscan]: 

Go to the input files for this example
Go to the output files for this example

Command line arguments

Scan protein sequence(s) with fingerprints from the PRINTS database
Version: EMBOSS:6.6.0.0

   Standard (Mandatory) qualifiers:
  [-sequence]          seqall     Protein sequence(s) filename and optional
                                  format, or reference (input USA)
   -emin               integer    [2] Minimum number of elements per
                                  fingerprint (Integer from 1 to 20)
   -emax               integer    [20] Maximum number of elements per
                                  fingerprint (Integer up to 20)
  [-outfile]           outfile    [*.pscan] Output file name

   Additional (Optional) qualifiers: (none)
   Advanced (Unprompted) qualifiers: (none)
   Associated qualifiers:

   "-sequence" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -scircular1         boolean    Sequence is circular
   -squick1            boolean    Read id and sequence only
   -sformat1           string     Input sequence format
   -iquery1            string     Input query fields or ID list
   -ioffset1           integer    Input start position offset
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-outfile" associated qualifiers
   -odirectory2        string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options and exit. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages
   -version            boolean    Report version number and exit

Qualifier Type Description Allowed values Default
Standard (Mandatory) qualifiers
[-sequence]
(Parameter 1)
seqall Protein sequence(s) filename and optional format, or reference (input USA) Readable sequence(s) Required
-emin integer Minimum number of elements per fingerprint Integer from 1 to 20 2
-emax integer Maximum number of elements per fingerprint Integer up to 20 20
[-outfile]
(Parameter 2)
outfile Output file name Output file <*>.pscan
Additional (Optional) qualifiers
(none)
Advanced (Unprompted) qualifiers
(none)
Associated qualifiers
"-sequence" associated seqall qualifiers
-sbegin1
-sbegin_sequence
integer Start of each sequence to be used Any integer value 0
-send1
-send_sequence
integer End of each sequence to be used Any integer value 0
-sreverse1
-sreverse_sequence
boolean Reverse (if DNA) Boolean value Yes/No N
-sask1
-sask_sequence
boolean Ask for begin/end/reverse Boolean value Yes/No N
-snucleotide1
-snucleotide_sequence
boolean Sequence is nucleotide Boolean value Yes/No N
-sprotein1
-sprotein_sequence
boolean Sequence is protein Boolean value Yes/No N
-slower1
-slower_sequence
boolean Make lower case Boolean value Yes/No N
-supper1
-supper_sequence
boolean Make upper case Boolean value Yes/No N
-scircular1
-scircular_sequence
boolean Sequence is circular Boolean value Yes/No N
-squick1
-squick_sequence
boolean Read id and sequence only Boolean value Yes/No N
-sformat1
-sformat_sequence
string Input sequence format Any string  
-iquery1
-iquery_sequence
string Input query fields or ID list Any string  
-ioffset1
-ioffset_sequence
integer Input start position offset Any integer value 0
-sdbname1
-sdbname_sequence
string Database name Any string  
-sid1
-sid_sequence
string Entryname Any string  
-ufo1
-ufo_sequence
string UFO features Any string  
-fformat1
-fformat_sequence
string Features format Any string  
-fopenfile1
-fopenfile_sequence
string Features file name Any string  
"-outfile" associated outfile qualifiers
-odirectory2
-odirectory_outfile
string Output directory Any string  
General qualifiers
-auto boolean Turn off prompts Boolean value Yes/No N
-stdout boolean Write first file to standard output Boolean value Yes/No N
-filter boolean Read first file from standard input, write first file to standard output Boolean value Yes/No N
-options boolean Prompt for standard and additional values Boolean value Yes/No N
-debug boolean Write debug output to program.dbg Boolean value Yes/No N
-verbose boolean Report some/full command line options Boolean value Yes/No Y
-help boolean Report command line options and exit. More information on associated and general qualifiers can be found with -help -verbose Boolean value Yes/No N
-warning boolean Report warnings Boolean value Yes/No Y
-error boolean Report errors Boolean value Yes/No Y
-fatal boolean Report fatal errors Boolean value Yes/No Y
-die boolean Report dying program messages Boolean value Yes/No Y
-version boolean Report version number and exit Boolean value Yes/No N

Input file format

pscan reads one or more protein sequences.

The input is a standard EMBOSS sequence query (also known as a 'USA').

Major sequence database sources defined as standard in EMBOSS installations include srs:embl, srs:uniprot and ensembl

Data can also be read from sequence output in any supported format written by an EMBOSS or third-party application.

The input format can be specified by using the command-line qualifier -sformat xxx, where 'xxx' is replaced by the name of the required format. The available format names are: gff (gff3), gff2, embl (em), genbank (gb, refseq), ddbj, refseqp, pir (nbrf), swissprot (swiss, sw), dasgff and debug.

See: http://emboss.sf.net/docs/themes/SequenceFormats.html for further information on sequence formats.

Input files for usage example

'tsw:opsd_human' is a sequence entry in the example protein database 'tsw'

Database entry: tsw:opsd_human

ID   OPSD_HUMAN              Reviewed;         348 AA.
AC   P08100; Q16414; Q2M249;
DT   01-AUG-1988, integrated into UniProtKB/Swiss-Prot.
DT   01-AUG-1988, sequence version 1.
DT   13-JUN-2012, entry version 145.
DE   RecName: Full=Rhodopsin;
DE   AltName: Full=Opsin-2;
GN   Name=RHO; Synonyms=OPN2;
OS   Homo sapiens (Human).
OC   Eukaryota; Metazoa; Chordata; Craniata; Vertebrata; Euteleostomi;
OC   Mammalia; Eutheria; Euarchontoglires; Primates; Haplorrhini;
OC   Catarrhini; Hominidae; Homo.
OX   NCBI_TaxID=9606;
RN   [1]
RP   NUCLEOTIDE SEQUENCE [GENOMIC DNA].
RX   MEDLINE=84272729; PubMed=6589631; DOI=10.1073/pnas.81.15.4851;
RA   Nathans J., Hogness D.S.;
RT   "Isolation and nucleotide sequence of the gene encoding human
RT   rhodopsin.";
RL   Proc. Natl. Acad. Sci. U.S.A. 81:4851-4855(1984).
RN   [2]
RP   NUCLEOTIDE SEQUENCE [GENOMIC DNA].
RA   Suwa M., Sato T., Okouchi I., Arita M., Futami K., Matsumoto S.,
RA   Tsutsumi S., Aburatani H., Asai K., Akiyama Y.;
RT   "Genome-wide discovery and analysis of human seven transmembrane helix
RT   receptor genes.";
RL   Submitted (JUL-2001) to the EMBL/GenBank/DDBJ databases.
RN   [3]
RP   NUCLEOTIDE SEQUENCE [LARGE SCALE MRNA].
RC   TISSUE=Retina;
RX   PubMed=17974005; DOI=10.1186/1471-2164-8-399;
RA   Bechtel S., Rosenfelder H., Duda A., Schmidt C.P., Ernst U.,
RA   Wellenreuther R., Mehrle A., Schuster C., Bahr A., Bloecker H.,
RA   Heubner D., Hoerlein A., Michel G., Wedler H., Koehrer K.,
RA   Ottenwaelder B., Poustka A., Wiemann S., Schupp I.;
RT   "The full-ORF clone resource of the German cDNA consortium.";
RL   BMC Genomics 8:399-399(2007).
RN   [4]
RP   NUCLEOTIDE SEQUENCE [LARGE SCALE MRNA].
RX   PubMed=15489334; DOI=10.1101/gr.2596504;
RG   The MGC Project Team;
RT   "The status, quality, and expansion of the NIH full-length cDNA
RT   project: the Mammalian Gene Collection (MGC).";
RL   Genome Res. 14:2121-2127(2004).
RN   [5]
RP   NUCLEOTIDE SEQUENCE [GENOMIC DNA] OF 1-120.
RX   PubMed=8566799; DOI=10.1016/0378-1119(95)00688-5;
RA   Bennett J., Beller B., Sun D., Kariko K.;
RT   "Sequence analysis of the 5.34-kb 5' flanking region of the human
RT   rhodopsin-encoding gene.";


  [Part of this file has been deleted for brevity]

FT                                /FTId=VAR_004816.
FT   VARIANT     209    209       V -> M (effect not known).
FT                                /FTId=VAR_004817.
FT   VARIANT     211    211       H -> P (in RP4; dbSNP:rs28933993).
FT                                /FTId=VAR_004818.
FT   VARIANT     211    211       H -> R (in RP4).
FT                                /FTId=VAR_004819.
FT   VARIANT     216    216       M -> K (in RP4).
FT                                /FTId=VAR_004820.
FT   VARIANT     220    220       F -> C (in RP4).
FT                                /FTId=VAR_004821.
FT   VARIANT     222    222       C -> R (in RP4).
FT                                /FTId=VAR_004822.
FT   VARIANT     255    255       Missing (in RP4).
FT                                /FTId=VAR_004823.
FT   VARIANT     264    264       Missing (in RP4).
FT                                /FTId=VAR_004824.
FT   VARIANT     267    267       P -> L (in RP4).
FT                                /FTId=VAR_004825.
FT   VARIANT     267    267       P -> R (in RP4).
FT                                /FTId=VAR_004826.
FT   VARIANT     292    292       A -> E (in CSNBAD1).
FT                                /FTId=VAR_004827.
FT   VARIANT     296    296       K -> E (in RP4; dbSNP:rs29001653).
FT                                /FTId=VAR_004828.
FT   VARIANT     297    297       S -> R (in RP4).
FT                                /FTId=VAR_004829.
FT   VARIANT     342    342       T -> M (in RP4).
FT                                /FTId=VAR_004830.
FT   VARIANT     345    345       V -> L (in RP4).
FT                                /FTId=VAR_004831.
FT   VARIANT     345    345       V -> M (in RP4).
FT                                /FTId=VAR_004832.
FT   VARIANT     347    347       P -> A (in RP4).
FT                                /FTId=VAR_004833.
FT   VARIANT     347    347       P -> L (in RP4; common variant).
FT                                /FTId=VAR_004834.
FT   VARIANT     347    347       P -> Q (in RP4).
FT                                /FTId=VAR_004835.
FT   VARIANT     347    347       P -> R (in RP4; dbSNP:rs29001566).
FT                                /FTId=VAR_004836.
FT   VARIANT     347    347       P -> S (in RP4; dbSNP:rs29001637).
FT                                /FTId=VAR_004837.
SQ   SEQUENCE   348 AA;  38893 MW;  6F4F6FCBA34265B2 CRC64;
     MNGTEGPNFY VPFSNATGVV RSPFEYPQYY LAEPWQFSML AAYMFLLIVL GFPINFLTLY
     VTVQHKKLRT PLNYILLNLA VADLFMVLGG FTSTLYTSLH GYFVFGPTGC NLEGFFATLG
     GEIALWSLVV LAIERYVVVC KPMSNFRFGE NHAIMGVAFT WVMALACAAP PLAGWSRYIP
     EGLQCSCGID YYTLKPEVNN ESFVIYMFVV HFTIPMIIIF FCYGQLVFTV KEAAAQQQES
     ATTQKAEKEV TRMVIIMVIA FLICWVPYAS VAFYIFTHQG SNFGPIFMTI PAFFAKSAAI
     YNPVIYIMMN KQFRNCMLTT ICCGKNPLGD DEASATVSKT ETSQVAPA
//

Output file format

Output files for usage example

File: opsd_human.pscan



CLASS 1
Fingerprints with all elements in order

Fingerprint GPCRRHODOPSN Elements 7
    Accession number PR00237
    Rhodopsin-like GPCR superfamily signature
  Element 1 Threshold 54% Score 64%
             Start position 39 Length 25
  Element 2 Threshold 49% Score 75%
             Start position 72 Length 22
  Element 3 Threshold 48% Score 56%
             Start position 117 Length 23
  Element 4 Threshold 50% Score 69%
             Start position 152 Length 22
  Element 5 Threshold 51% Score 74%
             Start position 204 Length 24
  Element 6 Threshold 42% Score 75%
             Start position 250 Length 25
  Element 7 Threshold 46% Score 67%
             Start position 288 Length 27


CLASS 2
All elements match but not all in the correct order



CLASS 3
Not all elements match but those that do are in order



CLASS 4
Remaining partial matches

The program reports hits in four classes.

Class1:
Matches where all elements of a motif exist in the correct order
Class2:
Matches where all elements exist but some are in the incorrect order
Class3:
Matches where some elements match and are in the correct order
Class4:
Miscellaneous matches

Data files

The data file is stored in the PRINTS directory of the standard EMBOSS data directory. The column information is described at the top of the matrix data file

Notes

Fingerprints are groups of conserved motifs or elements that together form a diagnostic signature for particular protein families. An uncharacterised sequence matching all motifs or elements can then be readily diagnosed as a true match to a particular family fingerprint. They can be used to diagnose family relationships in newly-determined sequences (especially from genome projects).

Usually the motifs or elements do not overlap, but are separated along a sequence, though they may be contiguous in 3D-space. Fingerprints can encode protein folds and functionalities more flexibly and powerfully than can single motifs, full diagnostic potency deriving from the mutual context provided by motif neighbours. Diagnostically, this is more powerful than using single motifs by virtue of the biological context afforded by matching motif neighbours.

The home web page of the PRINTS database is: http://www.bioinf.man.ac.uk/dbbrowser/PRINTS/

References

  1. Attwood, T.K., Flower, D.R., Lewis, A.P., Mabey, J.E., Morgan, S.R., Scordis, P., Selley, J. and Wright, W. (1999) PRINTS prepares for the new millennium. Nucleic Acids Research, 27(1), 220-225.
  2. Attwood, T.K., Beck, M.E., Flower, D.R., Scordis, P. and Selley, J. (1998) The PRINTS protein fingerprint database in its fifth year. Nucleic Acids Research, 26(1), 304-308.
  3. Attwood, T.K., Beck, M.E., Bleasby, A.J., Degtyarenko, K., Michie, A.D. and Parry-Smith, D.J. (1997) Novel developments with the PRINTS protein motif fingerprint database. Nucleic Acids Research, 25 (1), 212-216.
  4. Attwood, T.K. and Beck, M.E. (1994) PRINTS - A protein motif fingerprint database. Protein Engineering, 7(7), 841-848.
  5. Bleasby, A.J., Akrigg, D.A. and Attwood, T.K. (1994) OWL - A non-redundant composite protein sequence database. Nucleic Acids Research, 22(17), 3574-77.
  6. Bleasby, A.J. and Wootton, J.C. (1990) Constructing validated, non- redundant composite protein sequence databases. Protein Engineering, 3(3), 153-159.
  7. Parry-Smith, D.J. and Attwood, T.K. (1992) ADSP - A new package for computational sequence analysis. CABIOS, 8(5), 451-459.
  8. Attwood, T.K. and Findlay, J.B.C. (1994) Fingerprinting G-protein-coupled receptors. Prot.Engng. 7(2), 195-203.
  9. Attwood, T.K. and Findlay, J.B.C. (1993) Design of a discriminating finger- print for G-protein-coupled receptors. Prot.Engng. 6(2) 167-176.
  10. Akrigg, D., Attwood, T.K., Bleasby, A.J., Findlay, J.B.C, North, A.C.T., Maughan, N.A., Parry-Smith, D.J., Perkins, D.N. and Wootton, J.C. (1992) SERPENT - An information storage and analysis resource for protein sequences. CABIOS 8(3) 295-296.
  11. Parry-Smith, D.J. and Attwood, T.K. (1991) SOMAP - A novel interactive approach to multiple protein sequence aligment. CABIOS, 7(2), 233-235.
  12. Perkins, D.N. and Attwood, T.K. (1995) VISTAS - A package for VIsualising STructures And Sequences of proteins. J.Mol.Graph., 13, 73-75.
  13. Parry-Smith, D.J., Payne, A.W.R, Michie, A.D. and Attwood, T.K. (1998) CINEMA - A novel Colour INteractive Editor for Multiple Alignments. Gene, 211(2), GC45-56.

Warnings

The data files must have been created before running this program. This is done by running the printsextract program with the prints.dat file from a PRINTS release. You may have to ask your system manager to do this.

Diagnostic Error Messages

If you get the following EMBOSS FATAL ERROR message:

"prints.mat file not found. Create it with printsextract."

then your local PRINTS data has not been set up correctly in your EMBOSS DATA directory. Use 'printsextract' to do this.

Exit status

It exits with status 0 unless an error is reported.

Known bugs

See also

Program name Description
antigenic Find antigenic sites in proteins
epestfind Find PEST motifs as potential proteolytic cleavage sites
fuzzpro Search for patterns in protein sequences
fuzztran Search for patterns in protein sequences (translated)
patmatdb Search protein sequences with a sequence motif
patmatmotifs Scan a protein sequence with motifs from the PROSITE database
preg Regular expression search of protein sequence(s)
sigcleave Report on signal cleavage sites in a protein sequence

Author(s)

Alan Bleasby
European Bioinformatics Institute, Wellcome Trust Genome Campus, Hinxton, Cambridge CB10 1SD, UK

Please report all bugs to the EMBOSS bug team (emboss-bug © emboss.open-bio.org) not to the original author.

History

Target users

This program is intended to be used by everyone and everything, from naive users to embedded scripts.

Comments

None